The aumhaa Website has been transported, please go here instead:

We don't hang around here anymore.....

Search This Blog



At last.....

Yes, it took a while (read: too long), but the script is done.  I'm currently working on documentation and videos.  If you have m4l, then you're in luck:  after connecting Monomodular to the Ohm64, you can press the HELP button, and a fully working representation of the Ohm64 will appear.  You can click on an area of the control surface, and it will tell you what that region does in each mode.  Also, this view will be updated any time that you move a control or change modes.

There are still a few oversights...I think a few of the User Mappings for the Rotaries may not work, but I want to get this out to everyone before NAMM....expect refinements before the final release. 

For those of you that don't need two mixers, simply press the left and right shift buttons at the same time, and this will both sides of the mixer together (this is actually a third mixer with its own settings...the locations and modes of the other two mixers remains the same when you go back to them).  The shift-modes for the linked mixer are the same as those for the left mixer.  You change Shift-Modes by pressing shift (right or left) and pressing one of the channel select buttons on the same side as the pressed Shift.  The Modes are as follows:

(Left Mixer's Fader's are always assigned to Track Level)

Left Shift Mode 1:      Upper 8 Knobs = Device Control
            Lower 4 Knobs = Send Level for Selected Track

Left Shift Mode 2:    All Knobs = Send 1-3 for corresponding Fader

Left Shift Mode 3:    Upper 4 Knobs = Cutoff for filter of corresponding Fader
            Middle 4 Knobs = Q for Filter of corresponding Fader
            Lower 4 Knobs = Pan for corresponding Fader

Left Shift Mode 4:    All Knobs are User Assignable via Live's built-in MidiMapping functionality

(Except for Mode 1, the Right Mixer's grid is User Assignable either in part or completely)

Right Shift Mode 1:    Knobs = Return Level (1-4), Faders = Right Mixer Volume
Right Shift Mode 2:    Knobs = Return Pan (1-4), Faders = Return Level (1-4), Top 5 rows
                    of Grid are User Mappable (default assigned to Pad Translation),
                    Also, bottom row of the grid on the right zeros all Send Levels in project. 

Right Shift Mode 3:    Knobs = User Mappable, Faders = Return Level (1-4)

Right Shift Mode 4:    Knobs & Faders User Mappable  (this may be broken in current beta, I have to check it....)

Linked Shift Modes 1-4  are the same as for the Left Mixer.  While linked, the right Knobs are always assigned to the Return Levels.

The top right buttons Unshifted do the following from left to right, top to bottom:

Play, Stop, Record
Loop, Stop All Clips, Overdub

When shift is pressed, the same buttons control the Device Controller:

Device Left, Device Right, Lock
Parameter Bank Left, Parameter Bank Right, On/Off

The Grid (generally) controls clip launching for the first 5 rows.

The sixth row unshifted is Mute.
The seventh row unshifted is Solo.
The eighth row unshifted is Arm.

The sixth row shifted becomes a device selector (see below).
The seventh row shifted becomes crossfade assign.
The eight row shifted is stop clip.

If Monomod is connected, pressing the Livid button will put the Ohm64 in Monomod mode.  IF MONOMOD IS NOT CONNECTED, PRESSING THE LIVID BUTTON PUTS THE ENTIRE GRID INTO USER ASSIGNABLE MODE.

Device Selector:  a quick way to select a device without actually changing tracks.  This is mostly useful if you are using Monomod and its LCD screen.  Rename your plugin with the prefix 'p1' through 'p8' (for each button in the device selector), and when you press shift and one of the device selector buttons, the plugin will automatically be loaded into the Device Controller.  (You have to release shift before the change is reflected on the LCD....this will be changed on the next version, hopefully)

Master Volume and Cue Volume:  Press the Right Shift, and while it is held, the far Right Fader becomes the Master Volume, and the far Right Knob becomes the Cue Volume.

Oh, and you may notice that now when you change modes, the backlighting of the Ohm64 changes to let you know.  The method of lighting for each mode may be changed in the file, along with all the User identifier/channel settings for each button.

I think that's it....if I've missed something, please refer to the Help section of Monomod (if you have it). I'm working on some video tutorials at the moment, but I have a show tomorrow night and it will take me a bit longer than planned.  In the meantime, I'm posting a short "wank session" video I did after getting frustrated with my fourth attempt to narrate a comprehensive tutorial musical value, and very little tutorial value, but at least it gives you an idea of what is possible with the script, and some reasons to use Monomodular in conjunction with the Ohm64.

Some technical notes about changes and additions:  I maintain that I did NOT spend a week making some silly-ass tutorial sketch merely to enlighten the public.  In fact, I had some ulterior motives. The framework I built will become the basis for the next major revision of the _Framework Mods scripts, making it possible to easily add/remove capabilities to this generic schema of control setup.  Take a look at the js bundled within Monomod, if you have inclination.  There are a bunch of functions I've added that are of general use for anyone working with the _Framework scripts, and they basically function the same as their corresponding components in Python.  If you use the 'element()' function to create an API object, it will be appended to an array that can be easily destructed upon dissolving the patch.  It also allows the assignment of other attributes upon instantiation of the object.  THIS GREATLY SIMPLIFIES THINGS, and should be incorporated into the js 'Live API' object itself, in my opinion.  There is also a dictionary that defines a bunch of regions (this is what powers the INFO engine)...that's the bit that will eventually become the new framework for the Python stuff, and is borrowed (read: stolen) from the Device naming dictionary method's in the _Framework scripts.

Unless you've done some work with this sort of thing, you probably didn't blink an eye;  but if you have done some work with this sort of thing, you should be saying, "Holy Hack, Batman!  How the hell did he do that?!"  I've been talking for a while about adding some overloads to deal with the crippled _Framework components that Ableton has given us with the stock m4l.  Now it is possible to have the values sent to the connected controller forwarded to callbacks in m4l.  It is also possible to send value's from m4l objects and be received in the same manner that they would be received if the controller was sending them.  In short, I'm working towards the goal of being able to use the _Framework scripts to do all the heavy lifting, but still be able to tell them what to do from m4l (which is much more scriptable).  I think I have succeeded in this, but only time and testing will tell. 

The short of it:  the tutorial sketch is the Framework for the new iPad interface.  That means that soon you will have the ability to access all of this functionality (and MORE!) through TouchOSC.  It also means that the script I have written should be adaptable to other control surfaces, either through coaxing in Python, or direct interaction in m4l.

Planned changes:  Oh, lots ;)

In particular:  before final release (or possibly in first revision, depending on how much time I have), I am going to add some components that tell m4l when the controller is actually present, as well as when the script destructs (so that it can clean up without any hassles).

If I can find a good way, I will add some stuff to automatically orient the crossfader correctly (I've been going round and round with this....nothing satisfies me so far).  In the meantime, make sure that you reverse the stock orientation of the crossfader with Ohm64Control. 

There is some tweaking to do still with the grid in Linked mode....I just noticed since I've been documenting things, and asking myself, "hmmmm....I wonder what that does in this mode...."   Alas, we are all fallible, every one of us.

Channel Select is not working as I planned when in Monomod mode:  this will be fixed.

I think there are some incorrect assignments for the grid in Right Mixer Modes 2-4. This will get fixed.

General documentation in the Python script will be added, and I'll clean it up a bit, when I know that everything is working optimum.

There will be User configuration mapping to change a few default behaviours: 

1. Whether or not using the Device Selector also puts Live's focus to the Plugin being controlled.
2. Default boot state of the Mixer mode (Linked or Unlinked).

I've probably left out tons of important details....

Cheers for now, enjoy, and let me know if anything isn't working as expected.


("The check is in the mail".....beta testers will see files this evening, in the meantime you can check out this video:)

No comments:

Post a Comment